The manufacturing processes for furniture handles vary based on the material used, with each material following its own established technical route. The production workflows for the most common materials are outlined below:
Zinc Alloy Handle Manufacturing Process
This is currently the most widely used production method. It is ideal for handles featuring complex relief patterns-such as those found in French or traditional Chinese styles-resulting in high-strength products with a lifespan of over eight years.
Die-Casting: Molten zinc alloy is injected into a mold to create a raw casting. Each piece undergoes rigorous inspection to screen for defects such as sand holes, air pockets, or deformation. The precision of the hole spacing is critical, as it directly determines how well the handle will fit during installation.
Precision Machining: Excess material is removed, hole positions are refined, and threads are calibrated to ensure a smooth installation process, free from issues like burrs or stripped threads.
Fine Polishing: The surface undergoes a multi-stage polishing process-from coarse to fine-to eliminate sanding marks and scratches. Surface roughness is controlled to Ra ≤ 0.8μm, creating an optimal foundation for subsequent surface treatments.
Surface Treatment: Standard finishes are typically achieved through electroplating. For specialized, high-end aesthetics-such as matte "light luxury" tones or gunmetal gray-an electrophoretic coating process is used. By strictly controlling parameters like voltage and chemical bath temperature, manufacturers minimize color variations and the risk of paint peeling.
Final Inspection & Packaging: Every batch undergoes a thorough visual inspection. Handles are packed with the necessary screws and hardware, then individually protected and packaged to prevent damage or impact during transit.